Skip to content
LISEN BAUMER · Point Level Sensor
◎ EN
Request a quote

Installation

G½, BSPP and NPT: why the thread name matters

A Point Level Sensor can be easy to integrate when the process connection and seal are specified correctly.

4 10 月 2026 · 2 minute read

POINT LEVEL SENSOR / PRACTICAL ADVANTAGE

Make a compact retrofit mechanically predictable

A Point Level Sensor can be easy to integrate when the process connection and seal are specified correctly. Identifying G, BSPP or NPT before ordering prevents an otherwise suitable compact sensor from becoming a poor mechanical fit. Review the entire connection drawing, including where pressure is sealed.

Identify the actual standard

A nominal half-inch designation does not describe every geometric detail. Check whether the connection is parallel or tapered and identify the specified standard. A partially engaging thread is not evidence of compatibility. For replacement work, obtain a drawing or verified connection code rather than estimating from a photograph.

Find the intended seal

Some parallel-thread arrangements seal at a gasket or defined face; others use a manufacturer-specific hygienic interface. Follow the instructions for the actual variant. Do not apply a generic instruction about thread tape to every hygienic or face-sealed connection.

The sensor, adapter and vessel connection can each introduce a different interface. List all of them on the quotation to avoid an incomplete package.

Check more than leakage

An adapter can change insertion depth, create a retention pocket or shift the sensing position. It also has its own pressure, temperature and material limits. Review the installed section before treating an adapter as a simple thread converter.

What to confirm for your application

  • Thread standard and complete connection code
  • Parallel or tapered form
  • Seal type and permitted sealing practice
  • Resulting insertion depth
  • Adapter pressure and material limits

Check the assembled interface

Obtain a section drawing showing where the installed sensor seals and where the active sensing region ends up. Do not force together parts that appear nearly compatible. Review mounting torque and the manufacturer’s sealing instructions for the exact connection. In a hygienic assembly, the intended adapter and gasket arrangement also affects cleanability and drainage. A retrofit should preserve the approved process interface or explicitly document the changes required; the label G½ alone does not answer those questions.

Review item Meaning Action
Thread form Standard, size and parallel/taper geometry Similar nominal sizes are not interchangeability evidence.
Seal Specified sealing face, gasket or permitted method Verify material, compression and temperature duty.
Sensing position Active-tip exposure after full installation A correct thread can still leave a recessed tip.

Explore the Point Level Sensor advantages guide or compare the available sensor families for this duty.

Put this Point Level Sensor advantage to work

Compare the Lisen and Baumer Point Level Sensor families, prepare an application brief, or use the sensor selector to organize the next technical discussion.

References

Baumer CleverLevel LBFS datasheet — supplied reference, EN/2018-03-01

Lisen technical reference — English summary of the supplied 2024-11-25 manual

Technical guidance. Verify the current order-code documentation and your plant requirements before applying a recommendation.

Continue reading

LISEN · BAUMER

Put Point Level Sensor advantages to work in your process.

Tell us the medium, switching task, temperature, pressure and connection. We will help define the sensor family and installation package.

Request a quote
Contact on WhatsApp
滚动至顶部