Water-based cleaners, detergent blends, compatible process liquids and chemical dosing ingredients
Match local detection to a changing chemical product
A suitable Point Level Sensor gives chemical or detergent equipment a direct input for filling, emptying and product presence. Configurable sensing can be useful when foaming or formulation changes complicate the signal. Review chemical compatibility and the full product range before fixing a family and setting.
What the sensor needs to do
A formulation change may alter coating, foaming and electrical response even when the product keeps the same commercial name.
| Location | Control objective | Selection focus |
|---|---|---|
| Dosing day tanks | Low-level warning before a dosing interruption. | Identify the remaining usable volume. |
| Blend vessels | High or low product-presence signals. | Test all recipes and worst-case deposits. |
| Transfer piping | Presence monitoring near a defined location. | Check trapped liquid, gas pockets and drainage. |
Installation and integration
Review compatibility for every wetted component, including the sensing tip, metal body, seal and adapter. Ask for concentration and temperature rather than accepting a chemical trade name alone. Place the sensing face where the process state is representative and where accumulated deposits can be inspected.
A representative test plan
Test the actual formulations, including concentrated cleaning solutions when the sensor remains installed during cleaning. Include the thickest residue and the minimum dielectric-response medium. Hazardous-area requirements need a separately selected approved configuration and a documented installation design.
A common selection mistake
Assuming that PEEK, 316L or titanium is universally compatible, or that a family brochure approves a standard unit for any hazardous zone.
What to include in your inquiry
- Chemical identity, concentration and relevant safety data
- Production and cleaning temperatures with duration
- Pressure, vacuum and pressure cycling
- Area classification and required order-code documentation
Choose a starting point
Review Lisen electronic point switches for a configured industrial package or Baumer CleverLevel families for a documented manufacturer selection. Selection depends on the exact medium, configuration and duty. A family name alone is insufficient to approve the application.
See how these benefits fit into the broader Point Level Sensor advantages and compare the available product families.
Technical references
Lisen technical reference — English summary of the supplied 2024-11-25 manual ↗
Baumer — CleverLevel Point Level Sensor portfolio (reviewed 2026-10-04) ↗
Family information and engineering guidance are a starting point. Confirm the exact order-code documentation and installation requirements.