Milk, yogurt, syrup, sauces, edible ingredients and beverage blends
Support filling and emptying with compact product detection
In food and dairy equipment, a Point Level Sensor can give a useful full, low or product-present input without a large float assembly. A suitable hygienic connection supports a compact installation. Review product changes and cleaning states so the selected signal remains useful throughout the operating cycle.
What the sensor needs to do
A sensor that sees a residual film as a full pipe can keep a transfer permissive active after usable product has drained.
| Location | Control objective | Selection focus |
|---|---|---|
| Balance tanks | A defined low level before the transfer pump draws air. | Check the lowest usable volume and outlet geometry. |
| Filling equipment | Product present before starting a filling sequence. | Review bubbles, splashes and intermittent flow. |
| CIP return | A repeatable distinction between defined process states. | Test product, rinse water and the actual cleaning solutions. |
Installation and integration
Use a documented hygienic connection with a compatible seal and the specified mounting orientation. The active tip must contact the bulk medium without sitting in a dead pocket. Review drainability, cleanability and access to the connector as part of the complete assembly. An industrial G½ thread does not become a hygienic connection merely because both parts are stainless steel.
A representative test plan
Use representative product at the coldest and hottest production conditions. Record a clean dry state, a covered state, the drained coated state, foam where present, and the complete cleaning cycle. A single beaker test with water cannot establish performance with yogurt or syrup.
A common selection mistake
Treating a washdown rating as evidence of process-side hygienic approval, or assuming a short cleaning-temperature limit permits continuous hot operation.
What to include in your inquiry
- Product composition, viscosity and normal temperature
- CIP/SIP chemicals, concentrations, time and temperature
- Mounting drawing, connection standard and seal
- Desired wet/dry output and PLC input type
Choose a starting point
Review Lisen electronic point switches for a configured industrial package or Baumer CleverLevel families for a documented manufacturer selection. Selection depends on the exact medium, configuration and duty. A family name alone is insufficient to approve the application.
See how these benefits fit into the broader Point Level Sensor advantages and compare the available product families.
Technical references
Lisen technical reference — English summary of the supplied 2024-11-25 manual ↗
Baumer — CleverLevel Point Level Sensor portfolio (reviewed 2026-10-04) ↗
Family information and engineering guidance are a starting point. Confirm the exact order-code documentation and installation requirements.