Skip to content
LISEN BAUMER · Point Level Sensor
◎ EN
Request a quote

Testing & maintenance

CIP and SIP: specify the complete cleaning envelope

A suitable Point Level Sensor can remain part of a process assembly across production and cleaning when the chosen version covers both duties.

4 10 月 2026 · 2 minute read

POINT LEVEL SENSOR / PRACTICAL ADVANTAGE

Keep the point signal useful through the cleaning cycle

A suitable Point Level Sensor can remain part of a process assembly across production and cleaning when the chosen version covers both duties. That supports a compact installation with defined interfaces. Review the entire cycle, including chemical exposure and temperature duration, rather than only the production setpoint.

Describe each cleaning phase

Record pre-rinse, chemical circulation, final rinse and any sterilization step that applies. Include concentration, flow conditions, temperature peaks and exposure duration. A brief permitted peak should not be interpreted as continuous service at that temperature.

Review the whole assembly

The sensing tip may tolerate a condition that the seal or connector does not. Hygienic suitability also depends on the matched process fitting and installation. Check how the assembly drains and whether heat can reach the electronics beyond their ambient limit.

Do not infer SIP suitability solely from a catalogue’s largest temperature number. Confirm the exact configuration and any required projection length or cooling arrangement.

Test the operational sequence

Define how the controller interprets cleaning liquid and transitional states. Verify that the sensor returns correctly to the intended production state after the cycle. Preserve the approved cleaning envelope so later changes in chemical concentration or temperature receive a corresponding sensor review.

What to confirm for your application

  • Cleaning chemistry and concentration
  • Peak temperature, pressure and duration
  • Exact sensor/adapter/seal configuration
  • Signal interpretation during cleaning
  • Post-cycle reset and change-control requirements

Explore the Point Level Sensor advantages guide or compare the available sensor families for this duty.

Put this Point Level Sensor advantage to work

Compare the Lisen and Baumer Point Level Sensor families, prepare an application brief, or use the sensor selector to organize the next technical discussion.

References

Baumer CleverLevel LBFS datasheet — supplied reference, EN/2018-03-01

Lisen technical reference — English summary of the supplied 2024-11-25 manual

Technical guidance. Verify the current order-code documentation and your plant requirements before applying a recommendation.

Continue reading

LISEN · BAUMER

Put Point Level Sensor advantages to work in your process.

Tell us the medium, switching task, temperature, pressure and connection. We will help define the sensor family and installation package.

Request a quote
Contact on WhatsApp
滚动至顶部