POINT LEVEL SENSOR / PRACTICAL ADVANTAGE
Keep a useful signal through ordinary process movement
A Point Level Sensor paired with suitable delay logic can help distinguish a meaningful state change from short process disturbances. The benefit is less nuisance cycling while retaining the required response. Select damping from the actual timing margin and observed behavior, rather than masking a poor sensor location.
Identify the source of chattering
A changing signal may come from a turbulent surface, bubbles, a poorly placed sensor, unstable power or marginal media response. Filtering should follow diagnosis. A mechanical retention pocket or wiring problem is unlikely to be solved reliably by simply increasing delay.
Calculate the whole response path
Include sensor response, configured damping, PLC scan or timer behavior and actuator reaction. Some applications tolerate a delayed stable indication; others need prompt detection of an empty pipe or rising level.
A delay set independently in both the sensor and PLC can accumulate unnoticed. Keep the values in the commissioning record and review the worst-case sequence.
Use acceptance criteria
Test short disturbances that should be ignored and sustained changes that must be acted on. Verify both covered-to-uncovered and uncovered-to-covered transitions, since the desired behavior may differ. A setting is acceptable only when it rejects nuisance events while meeting the required process response.
What to confirm for your application
- Cause and duration of nuisance events
- Maximum permitted detection delay
- Sensor and PLC timer settings
- Both transition directions
- Documented functional test
Explore the Point Level Sensor advantages guide or compare the available sensor families for this duty.
Put this Point Level Sensor advantage to work
Compare the Lisen and Baumer Point Level Sensor families, prepare an application brief, or use the sensor selector to organize the next technical discussion.
References
Baumer CleverLevel LBFS datasheet — supplied reference, EN/2018-03-01
Lisen technical reference — English summary of the supplied 2024-11-25 manual
Technical guidance. Verify the current order-code documentation and your plant requirements before applying a recommendation.