Skip to content
LISEN BAUMER · Point Level Sensor
◎ EN
Request a quote

Media behavior

Low-dielectric media: why a water test is not enough

A suitable Point Level Sensor can provide a local presence signal for oils and other low-dielectric media that are poorly served by a conductivity-only approach.

4 10 月 2026 · 2 minute read

POINT LEVEL SENSOR / PRACTICAL ADVANTAGE

Extend point detection to suitable low-dielectric liquids

A suitable Point Level Sensor can provide a local presence signal for oils and other low-dielectric media that are poorly served by a conductivity-only approach. Compare covered and empty responses with the actual formulation. Adequate separation between those states is the basis for a useful, repeatable switching decision.

Look for separation from the empty state

Electronic point sensing needs a distinguishable response between relevant states. A small electrical change near the tip leaves less margin for product variation, residue and installation effects. Check the manufacturer’s medium requirement for the exact sensor family rather than assuming every electronic switch has the same capability.

Use realistic composition and temperature

A trade name alone may describe several formulations. Ask for concentration, additives and expected temperature range. If the medium can absorb moisture or change composition during production, include those conditions in the review.

A bench test should use the intended mounting arrangement when the vessel or adapter affects the sensing field. Keep a record of the empty condition as well as the immersed result.

Do not transfer a Baumer limit to Lisen

The supplied Baumer LBFS reference mentions a dielectric requirement. The supplied Lisen manual does not establish the same numerical threshold. They are separate products and should be evaluated independently. If adequate switching margin cannot be demonstrated, assess another principle or installation location.

What to confirm for your application

  • Exact medium and formulation
  • Dielectric information if available
  • Operating temperature and moisture range
  • Model-specific medium requirement
  • Measured or demonstrated wet/dry margin

Explore the Point Level Sensor advantages guide or compare the available sensor families for this duty.

Put this Point Level Sensor advantage to work

Compare the Lisen and Baumer Point Level Sensor families, prepare an application brief, or use the sensor selector to organize the next technical discussion.

References

Baumer CleverLevel LBFS datasheet — supplied reference, EN/2018-03-01

Lisen technical reference — English summary of the supplied 2024-11-25 manual

Technical guidance. Verify the current order-code documentation and your plant requirements before applying a recommendation.

Continue reading

LISEN · BAUMER

Put Point Level Sensor advantages to work in your process.

Tell us the medium, switching task, temperature, pressure and connection. We will help define the sensor family and installation package.

Request a quote
Contact on WhatsApp
滚动至顶部