Skip to content
LISEN BAUMER · Point Level Sensor
◎ EN
Request a quote

Selection

Point Level Sensor selection: turn product advantages into a specification

A Point Level Sensor specification starts with one useful outcome: a tank-full signal, a low-level stop request or product presence at a machine inlet.

4 10 月 2026 · 3 minute read

POINT LEVEL SENSOR / PRACTICAL ADVANTAGE

Select for a clear process benefit

A Point Level Sensor specification starts with one useful outcome: a tank-full signal, a low-level stop request or product presence at a machine inlet. Naming that outcome makes it easier to choose the right output and mounting package. The checklist below connects each selection item to that intended result.

Write a short process description

State whether the duty is high level, low level, empty pipe or continuous measurement. Identify the medium by composition and concentration where possible. Include viscosity, suspended solids, foam and deposits. Record normal operation, startup, cleaning and upset conditions separately; the most severe condition may occur outside production.

Build a compatible assembly

Specify the connection standard, seal arrangement, insertion depth, wetted materials and cable orientation. Match PNP or NPN output to the PLC input and check its current demand. Include power supply tolerance and the required state when product is absent.

If approval documents are required, identify the exact approval and jurisdiction. A stainless steel housing, an IP rating or a material report does not substitute for product-specific hygienic or hazardous-area documentation.

Make the quotation comparable

Ask every supplier to list included adapters, seals, cables and configuration services. Attach a nameplate photo when replacing an existing sensor. Require any deviation from the requested duty to be stated. This gives procurement a fair comparison and gives commissioning staff a clear record of what was selected.

What to confirm for your application

  • Medium and all process/cleaning limits
  • Mechanical and electrical interfaces
  • Required approvals and acceptance criteria
  • Quantity, destination and target delivery
  • Existing sensor code and drawing if applicable

Resolve the specification in four passes

Keep an “unknown” entry for information that is genuinely unavailable. A supplier can then identify what must be measured, tested or reviewed instead of silently converting missing data into an assumption. If you are replacing an existing instrument, add photographs of the label and installation, the wiring diagram and the reason for replacement. A failed original sensor is not automatically evidence that its technology is unsuitable; installation, settings and maintenance may explain the symptom.

Review item Meaning Action
Process Medium, temperature, pressure and cleaning Include startup, shutdown and product changes.
Mechanical Connection, seal and active-tip exposure Review an assembled section drawing.
Electrical Supply, output, input and required state Trace the signal into the control narrative.
Evidence Documents and representative acceptance test Agree what counts as a pass before ordering.

Explore the Point Level Sensor advantages guide or compare the available sensor families for this duty.

Put this Point Level Sensor advantage to work

Compare the Lisen and Baumer Point Level Sensor families, prepare an application brief, or use the sensor selector to organize the next technical discussion.

References

Baumer CleverLevel LBFS datasheet — supplied reference, EN/2018-03-01

Lisen technical reference — English summary of the supplied 2024-11-25 manual

Technical guidance. Verify the current order-code documentation and your plant requirements before applying a recommendation.

LISEN · BAUMER

Put Point Level Sensor advantages to work in your process.

Tell us the medium, switching task, temperature, pressure and connection. We will help define the sensor family and installation package.

Request a quote
Contact on WhatsApp
滚动至顶部