Đến nội dung
LISEN BAUMER · Phát hiện mức điểm
◎ VI
Yêu cầu báo giá
Trang chủ / So sánh công nghệ

LISEN · BAUMER

Point Level Sensor · So sánh công nghệ

Bắt đầu từ nhiệm vụ điều khiển. Công tắc mức điểm có thể thay công tắc tương thích khác, nhưng không thay trực tiếp bộ đo liên tục.

01

Phát hiện mức điểm

Phát hiện vật liệu tại vị trí cố định. Dùng cho mức cao, mức thấp và báo ống rỗng.

02

Đo mức liên tục

Đo mức hoặc khoảng cách thay đổi. Giữ radar, siêu âm hoặc đo áp suất khi cần giá trị liên tục.

01 / COMPARE

Point Level Sensor vs float switch

Explore the installation and maintenance value of a short electronic probe without a moving float.

Read the comparison ↗
02 / COMPARE

Point Level Sensor vs vibrating fork

Compare a short electronic probe with a fork for insertion space, medium response and the required switching duty.

Read the comparison ↗
03 / COMPARE

Conventional capacitive switch vs frequency-sweep Point Level Sensor

Review how sensing response and trigger options affect a useful product-present signal. Frequency sweep also uses the medium’s dielectric response.

Read the comparison ↗
04 / COMPARE

Point Level Sensor vs conductive probe

Consider suitable electronic detection where the medium offers limited conductivity, then verify the actual product response.

Read the comparison ↗
05 / COMPARE

Point Level Sensor: electronic vs optical detection

Compare compact local detection principles for the product, residue and cleaning conditions at the sensing tip.

Read the comparison ↗
06 / COMPARE

Point Level Sensor and radar level measurement

Use a local threshold signal where an action is required and continuous radar information where a changing level value is needed.

Read the comparison ↗
07 / COMPARE

Point Level Sensor and ultrasonic measurement

Explore the benefit of local detection at a probe alongside the distinct role of continuous distance measurement.

Read the comparison ↗
08 / COMPARE

Point Level Sensor and hydrostatic measurement

A direct local presence signal can serve a threshold task without converting pressure to level; continuous duties need their own measurement.

Read the comparison ↗

Bài kỹ thuật và tài liệu gốc bằng tiếng Anh. Các trang chính có 20 ngôn ngữ.

Phát hiện mức điểm

Công tắc phản ứng tại vị trí lắp đặt

Di chuyển mức để so sánh ngưỡng cố định với mức thay đổi. Đây là minh họa nguyên lý, không phải thử thời gian đáp ứng.

Cảm biến được phủ

Công tắc phản ứng tại vị trí lắp đặtMIN / MAX0%100%PNP / NPN

LISEN · BAUMER

Bắt đầu từ quy trình. Chúng tôi giúp xác định cảm biến.

Môi chất, nhiệt độ, áp suất, kết nối và nhiệm vụ: năm dữ liệu cho yêu cầu hữu ích.

Yêu cầu báo giá
Liên hệ qua WhatsApp
滚动至顶部